[MW:1335] A TECHNHCAL QUESTION AND HELP

DEAR SIR

IF A SPLIT TEE IS PRODUCED ACCORDING TO ASME B31.8 BY THE METHOD OF EXTRUDING THE OUTLET ,IS IT NECESSARY TO DO HYDROSTATIC TEST ON IT BY THE MANUFACTURER , IF YES ,WHAT PARTS ,ONLY OUTLET OR WHOLE OF TEE ,WHAT IS THE STANDARDS AND PROCEDURES , IF NO , WHAT IS THE REFERENCES AND STANDARDS .

TAKE IT IN THE MIND THAT IN MSS SP 75 , WHICH IS A STANDARD FOR   BUTT WELDING TEES , HYDROSTATIC TEST IS NOT NECESSARY BY THE MANUFACTURE BUT IT SHOULD BE CAPABLE TO WITHSTAND  THE HYDROSTATIC TEST TO 1.5 TIMES OF DESIGN PRESSURE

YOUR HELP TO THE  ABOVE  QUESTION AND PROBLEM WILL BE APPRECIATED

YOURS FAITHFULLY

MOHAMMAD YAGHOUBI

----------------------------------------------
National Iranian Gas Company
http://www.nigc.ir

--~--~---------~--~----~------------~-------~--~----~
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
-~----------~----~----~----~------~----~------~--~---