Hi Karthik,
If it is the case i need to prepare the base metal thk of 1.5 mm , which is not feasible .
On Mon, Sep 12, 2011 at 9:05 AM, Karthik <karthik6684@yahoo.com> wrote:
--
--- On Sun, 9/11/11, K.Babu <kbabupsg@gmail.com> wrote:
From: K.Babu <kbabupsg@gmail.com>
Subject: [MW:12425] Welder Qualification-ASME Sec IX- Clad materials
To: materials-welding@googlegroups.com
Date: Sunday, September 11, 2011, 9:37 PM
--Gents,I have confused on the above topic, could some one clarify the below situation1) 21" ID ,Pipe (AISI 4130 ) cladded by INconel 625 with thickness of 1.5 mm with qualified Welding Procedure in other company.2) We need to overlay the above item 1 , by inconel 625 on the existing Inconel 6253) If i want to qualify the welder, i need to consider the Inconel 625 as base metal or AISI 4130 as base metal ?Pls share your exp, in as this kind of situation
Thanks & regards,
K.Babu
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
Thanks & regards,
K.Babu
Singapore
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment