Re: [MW:29662] SS316 Welding - Porosity Intermittent

Due improper baking of electrodes 

On Fri, 31 May 2019, 6:31 pm Raju Kandula, <rgkandula@gmail.com> wrote:

Dear Experts,

   Our project (dosing tank) requires welding of SS316/316L plates of 5mm and 6mm Thickness, while welding of 6mm thickness with back weld, after welding on side-1 and back grinding from other end, we are observing porosity in the centre line with intermittent space during first and second phase. (attached LPT photo for reference)

   Kindly request, to advice your guidance for rectification.

Regards

Raju Kandula

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALwNT%2B_L0fTF7to9_9H97mQpGNZiY9yo7jbZEExcW4%2BexCFEwg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOp_kKh7qUg9wnfwBx1bROXjcAuvAi0r2rkLsdQfmVawd1AHhw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.