Skip to main content

Re: [MW:29588] Thickness Qualification Range as per AWS D 1.1

Good day, I hope this information serves you.


"Nunca cambiarás tu vida hasta que cambies algo que haces diariamente", por eso "Si seguimos haciendo lo que estamos haciendo, seguiremos consiguiendo lo que estamos consiguiendo"

Saludos...




El mar., 14 de may. de 2019 a la(s) 00:21, Rajendra Jadhav (raj04aug@gmail.com) escribió:
As per AWS  D 1.1. if I do WPS qualification on 90 mm thickness Plate with Impact at -40 deg then how much we qualified for thickness range ?
Please advise me .
Thank you in advance.

Regards,
Rajendra Jadhav

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKtLVJxXpx%2BZ7N7uGzEbYmK_O5vm41kn0m_QomkMA958aYCbhg%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

AVISO DE PRIVACIDAD SIMPLIFICADO. Le informamos que COTEMAR protege sus Datos Personales, Sensibles, Financieros y Patrimoniales; por ello hemos implementado las medidas de seguridad necesarias para la protección de sus Datos Personales., ello, en cumplimiento con lo establecido por la Ley Federal de Protección de Datos Personales en Posesión de Particulares y su Reglamento, COTEMAR (Cotemar S.A  de C.V. y sus empresas filiales) con domicilio en Av Paseo de la Reforma 483, Piso 52, Colonia Cuauhtémoc, Cuidad de México, 06500 y con teléfono de atención a clientes y proveedores (938) 381-1400, hace de su conocimiento la política de privacidad en el tratamiento de sus datos personales: Los datos personales del titular, incluyendo los sensibles, que actualmente o en el futuro obren en nuestras bases de datos, serán tratados por COTEMAR, quien será la responsable de su información personal, con la finalidad de identificarlo; poder comunicarlo o contactarle; entre otras actividades análogas, relacionadas con el objeto social de COTEMAR, mismo que preponderantemente consiste en el arrendamiento, construcción, mantenimiento e ingeniería de complejos petroleros costa fuera a través de plataformas semisumergibles; prestación de servicios de alimentación y hospedaje costa fuera; transporte de personal y materiales mediante barcos especializados, entre otros, siempre relacionados al sector petrolero. El aviso con el tratamiento completo de sus datos personales lo podrá consultar en el sitio web www.cotemar.com.mx. Asimismo, cada vez que estos le sean recabados se le dará a conocer el Aviso de Privacidad correspondiente. Sus Datos Personales, Sensibles, Financieros y Patrimoniales serán tratados de conformidad con lo señalado en el Aviso de Privacidad correspondiente y los principios contenidos en la Ley Federal de Protección de Datos Personales en Posesión de los Particulares y su Reglamento.


AVISO DE CONFIDENCIALIDAD Y ALCANCE DE CONTENIDO. La información contenida en este mensaje de correo electrónico es confidencial y restringida y está destinada únicamente para el uso de la o las personas a que está dirigido, por lo que se le notifica que está estrictamente prohibida cualquier difusión, distribución o copia del mismo. Si ha recibido este mensaje de correo electrónico por error, debe destruirlo o eliminarlo de tal forma que no quede constancia del mismo y notificar al remitente por esta misma vía. Los correos electrónicos no son 100% seguros por lo que  COTEMAR (Cotemar, S.A. de C.V. y sus empresas filiales) no acepta ninguna responsabilidad por cambios realizados al contenido de este mensaje durante su envío o posteriormente. Aun cuando COTEMAR ha revisado contra virus los archivos anexos a este correo electrónico, se recomienda verificarlos antes de abrirlos. La documentación y/o información transmitida por el remitente al destinatario (s) no podrá ser utilizada en procedimiento legal, administrativo, mercantil, penal o cualquier otra materia, salvo autorización expresa por parte de COTEMAR o requerimiento de autoridad competente.


AVISO DE NO VINCULACIÓN. El remitente de este correo así como el apartado de sus datos de contacto no constituye una firma electrónica o escrita por lo que no podrá considerarse como la creación, aceptación ni vinculación de un contrato entre ninguna parte involucrada a menos que sea formalizado mediante un documento legal firmado por apoderados legales con facultades suficientes y sea aprobado por el Consejo Directivo de Cotemar, S.A. de C.V. y/o sus subsidiarias y/o sus empresas filiales y/o relacionadas.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPtMQtUYnsfgGUESceDEO4B4y%3DS0vEaXk7Q73fctaQZAU9FsYA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

Comments

Popular posts from this blog

Re: [MW:34105] SA266 GR4N 4 Cycle SPWHT

Hi,  You are correct, Minimum refers to the one cycle for which this part will expose until final work shop PWHT. hence mill test certificate shall include this.  Max. SPWHT, refers to additional cycles of heat treatment that are reserved for future repairs during equipment lifetime.  Again, these simulated no. Of cycles shall be specified in MTC.  The idea is we need to make sure that steel mechanical properties are not compromised upon exposure to multiple repairs (i e 4 cycles in your case).  One could say, if steel is subjected to 4 cycles and is ok, then it should by defacto be good for one cycle, yet, this is wrong assumption cause mechanical problems and microstructure of materials varies accordingly based on no. Of cycles for which material will expose. This is apparent in alloy steel and especially for impact test values as an example.  In your case, this forged CS with properties before PWHT can be understood to be " as forged" condition (i.e. Wit...

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...