Dear , 6013 is a low cost b
electrode but you will compromise on strength of joint. The plate material selected i.e. SA 516 Gr 70 is a material of reasonable good strength . E7018 is better and appropriate choice .
On Thu 9 May, 2019, 11:50 Bien ND, <bck055@gmail.com> wrote:
E7016/ E7018
On Tuesday, May 7, 2019 at 7:09:14 PM UTC+7, Kiran wrote:
> Dear All,
>
>
>
> Please refer below mentioned details and please let me know, can I use this details in PWPS as per D1.1.
>
> 1) Material -SA 516 Gr.70 to SA 516 Gr.70
>
>
> 2) P No- 1 Group No - 2 to P No- 1 Group No - 2
>
>
> 3) F No- 4
>
> 4) A No-1
>
>
> 5) SFA No- 5.1
>
>
> 6) AWS No(Class) -E-6013.
>
>
> I have debut about electrode.
>
>
> If any thing please wright briefly.
>
>
>
>
> Thanks and Regards
>
>
> Kiran
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b7cd973a-8c93-4437-9984-cd00da574b60%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CA%2BQ29OinojwdVc-OTD%3DJ1tW3bt8ZvkOO2UsLQ1jJWOvhWE8-rA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment