[MW:29623] As per Sec IX Welder Qualification Range for P43 to P43 GTAW

Dear experts,

Please let me know welder qualification range.

Details as below :

Actual Values

Pipe- Groove

1) P 43  To P 43 (SB-444)

2) GTAW ( Manual )

3) Thickness -5.54mm

4) SFA-5.14

5) F No- 43

6) Filler metal -ERNiCrMo-3

7) Position -6G

If I am not Wrong please check below i have mentioned Range Qualified.

Groove and Fillet Weld

1) P No - 1 thru 15F,34,41 thru 49

2) GTAW ( Manual )

3) SFA No- 5.xx

4) Thickness - 11.08mm

5) F no- 34,41,46

6) Filler metal - Any

7) Position - All

Please give me your feed back.

Regards

Kiran

 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/a0641006-7a9d-438d-8a30-75a59731576f%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.