Joints is non essential variable. So can go with back weld.. if iam wrong please let me know.
On Sun, 19 May 2019, 11:04 a.m. Raju Kandula, <rgkandula@gmail.com> wrote:
Hi all--We have a pqr qualified without backing and back weld, we have prepared a WPS without back weld, can I use the single WPS for joints with back weld
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALwNT%2B_AoaeESuhU3J3O%3DVJS%3DK5X_t268_TsLOoKS4dRFusqxA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAA_yh8o526Jxo_KrdJTvn9-9sbPSxUDp7kbOSBa2byhJfEu0DA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment