Re: [MW:29035] Please use google before sending questions to the group

Dear Experts,

Very much agreed with Mr Ramin. We must utilise the experts advise only when we don't have any other options or in a very special/unique case.

Thanks & Regards,

Jay Poojary

On Mon, Feb 4, 2019, 9:59 AM Ramin Kondori <raminkondori@gmail.com wrote:

Dear Members:

Please search google first.

You can better answers by using google.

I am surprised why people do not try google first. It is faster, easier and more efficient for these kind of questions.

For example, in your case, I just typed "valve closure test" on google for you.

this is the result page which gives you a lot of options and information.

If you did not find the answer there, then send your question to the group.

Or another example, Somebody earlier asked "how to qualify a WPS"...!!!

These kind of general questions could better be answered by searching online.

Thank you

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

On Thu, Jan 31, 2019 at 2:15 PM chiluka venkatramulu <ramuluchiluka@gmail.com> wrote:

Dear All,,

Is the Valve closer test means sheet leak test or body pneumatic test?

Venkatramulu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.