Sunday, August 2, 2015

[MW:23244] combination of PQRs to support the WPS

Dear friends 

Please give the advise below mentioned PQRs supporting to the WPS  

WPS 

1. Thickness range (Groove) : 6.02 mm to 21.94 mm (Process GTAW+SMAW)

PQRs

1. Thickness of the test coupon is 6.02 mm (Process GTAW+SMAW)

2. Thickness of the test coupon is 10.97 mm (Process GTAW+SMAW)





--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/6fff1e13-4b3f-4b2a-8601-2008be533083%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...