Dear Manish,
Most of the GB materials are, like DIN materials, replaced by European standards. So when you need cross references with ASME you will get European standards, where in case of the English standards BS is mentioned in front. You also can have DIN or other national Standardizations authority codes in front of it, but mostly the content is the same with a translation to the national language. In case of din this will be German. So for example if you have BS EN 10025-1 this will be similar to DIN EN 10025-1.
If you really need a cross reference with GB materials you will get an old list with materials not available any more, which in my opinion is not very interesting.
Met vriendelijke groeten / Best Regards
Herman Pieper
Pieper Quality Support & Inspection
Phone: +31 (0)521 380083
Fax: +31 (0)84 7539225
Cell: +31 (0)6 51691215
www.pieper-qsi.nl
Van: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] Namens Manish.Maheta@Linde-LE.com
Verzonden: woensdag 1 juni 2011 5:59
Aan: materials-welding@googlegroups.com
Onderwerp: [MW:11228] Cross-reference list of GB and ASME materials
Urgentie: Hoog
Dear All,
Can anyone please provide the cross-reference list of GB and ASME materials.
Please do not forward the cross-reference list of materials given in TEMA 9th Edition as it was prepared based on GB materials standards which have been now superseded by new GB standards.
Thanks in advance.
Regards,
Manish
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment