Check also client requirement for gasket contact surface.
Anyway, better you ask to paint maker how to clean such type of paint.
Thank you
Sent from my Hape Buluk®
powered by Sinyal Lieur INDOSAT
-----Original Message-----
From: Adi <adinraos@gmail.com>
Sender: materials-welding@googlegroups.com
Date: Sat, 30 Apr 2011 05:27:07
To: Materials & Welding<materials-welding@googlegroups.com>
Reply-To: materials-welding@googlegroups.com
Subject: [MW:10894] Paint repair procedure
Hi all....
Mistakenly flange serration area painted,
Is anybody having repair procedure for this? It is acceptable to
remove painted flange serration area by wire brush.
Adi
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment