[MW:10797] RE: 10776] welding bevel design

I think your problem can be solve if try to search in Google about Joint
Design.
I search just a couple minute in I found all the joint design for double
bevel

-----Original Message-----
From: materials-welding@googlegroups.com
[mailto:materials-welding@googlegroups.com] On Behalf Of hepo
Sent: Thursday, 21 April, 2011 4:25 PM
To: Materials & Welding
Subject: [MW:10776] welding bevel design

hello all
can anyone guide me to a online site for ready Joint design details/
sketches available to be used for general purpose fabrication plate works...
job in hand 50mm thk plt to weld to higher thk using double bevel ...looking
for bevel and root thk...
thanks in advance
hepo

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to
materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and
meant for educational purposes only, Users must take their own decisions
w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.