RE: [MW:10862] Re : Blasting and Paint on Weldment

I understood ,

Right now we’re facing the issue to convince the client’s since we apply TSA and Coat and Sealer ..

See references UG 99 in ASME VII

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of tamer said
Sent: Tuesday, 26 April, 2011 4:27 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:10857] Re : Blasting and Paint on Weldment

For any painting activities, ASME code is not applicable, only painting cods are applicable, also specially for painting you have to go to client specification which will guide you what paint system you have to apply.

Best regards

Tamer Said

Inspection Engineer

CSWIP 3.1 - BGAS Gr. 2 Holder

--- On Tue, 4/26/11, mustaffi <mustaffi@dynac.com.my> wrote:

From: mustaffi <mustaffi@dynac.com.my>
Subject: [MW:10851] Re : Blasting and Paint on Weldment
To: materials-welding@googlegroups.com
Date: Tuesday, April 26, 2011, 6:44 AM

Dear All,

Did anyone of you can help me for any references in ASME Code to proceed works for Blasting and Paint at weldment area ..

I will go through with Thermal Spray Coating on that area..

Regards

Mus

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

[MW:30043] Weep hole

If weep hole is not provided in dummy pipe before welding What will happen??? -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/da251ee6-fa7f-4851-b876-cdb3834ae341%40googlegroups.com .

[MW:36169] Cold Bending Qualification

Dear Experts, Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L. Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .

Materials & Welding

Search This Blog