Re: [MW:10867] ASME/ASTM equivalent of S355J2+N

Senthil

 

A36 doesn't have any Impact requirement, But S355K2+N is need an CVN@-40 deg cel.

 

Thanks & Regards,

 

K. Babu

----- Original Message -----

From: SENTHILKUMAR SWAMINATHAN

To: materials-welding@googlegroups.com

Sent: Tuesday, April 26, 2011 8:44 PM

Subject: Re: [MW:10863] ASME/ASTM equivalent of S355J2+N

Vikas,

Refer attached may help you. Hope it is A36 (ASTM)
 

Regards,
S.SENTHILKUMAR

---

From: Vikas Bhandari <vikas.bhandari349@gmail.com>
To: materials-welding@googlegroups.com
Sent: Tue, 26 April, 2011 9:09:50 AM
Subject: [MW:10855] ASME/ASTM equivalent of S355J2+N

Dear All

What is the ASTM/ASME equivalent of structural material S355J2+N (minimum yield strength 355 MPa, Tensile 470 to 630 MPa, C: 0.20 max, Si: 0.55 max, Mn: 1.60 max , CE: 0.45 max). A link to reference document stating the same would be much appreciated.

Thanks & best regards

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.