Re: [MW:10814] Re : Water hydrotest and Chloride Content in PPM

Buy in Demin Water - no other solution however 20ppm min is over the top for Duplex!
Towns water / potable water is suffice!
A

From: materials-welding@googlegroups.com <materials-welding@googlegroups.com>
To: materials-welding@googlegroups.com <materials-welding@googlegroups.com>
Sent: Sat Apr 23 05:00:10 2011
Subject: [MW:10803] Re : Water hydrotest and Chloride Content in PPM

Hi All Experts,

I need any sourcing from anybody ,

How to reduces the Chloride contents in PPM ..

I having are problem to proceed the Hydro test for Duplex Steel Materials coz Shell requirement seek for 20 PPM for standard medium for testing ..

Regards

Mus

***************************************************************************************************************************************************************************
This e-mail (which includes any files attached to it), it is intended solely for the named recipient and may contain CONFIDENTIAL, legally privileged or trade
secret information protected by law. It has been sent it via the internet and is therefore not secure against corruption, interception or unauthorised modification.

If you are not the intended recipient please do not read, use, disclose, distribute, copy, print or rely on any information contained in this e-mail. Please
immediately notify us by telephoning +44 (0) 1494 887808 or return it to us by e-mail to the sender, confirming that this e-mail has been deleted from
your system and any hard copies destroyed.

To the extent permitted by law, neither we nor any of our subsidiaries, parent entities or other affiliates, nor any employee, director or officer thereof,
accepts any liability whatsoever in relation to this e-mail including liability arising from any external breach of security or confidentiality or for virus
infection or for statements made which are clearly the sender's own and not made on our behalf.

"We" and "our" in this footer refer to the following legal entity:

VWS Westgarth Ltd. Registered in Scotland No. 147604, Orbital House, 3 Redwood Crescent, East Kilbride, G74 5PR

This company is a member of the Veolia Water Solutions & Technologies group, but please contact the sender should you have any question
regarding the legal entity on whose behalf this email was sent.
***************************************************************************************************************************************************************************

 ************************************************************************* This e-mail message and any attachments to it are intended only for the  named recipients and may contain confidential information. If you are not one of the intended recipients, please do not duplicate or forward this e-mail message and immediately delete it from your computer. If you  received this email in error, please notify postmaster@veoliawater.com *************************************************************************

Materails FAQs

Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change. Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...

Re: [MW:10788] ON PLOT PIPING & OFF PLOT PIPING

Piping systems involved for the flow lines and gathering lines from the well head isolation valve to the production facility or processing plant isolation valve are determined as OFF PLOT. ON PLOT defines piping system in the processing plant and production platform. ANSI/ASME B31.4 applies for off plot piping system. B31.4 allows the use of either API 1104 or ASME section IX (as appropriate). However, occasionally, a very small system such as piping within 500 feet of a processing plant (some client also said 400 feet) may be declared B31.3 rather than B31.4. When B31.3 is invoked, only ASME Section IX is used. before you decide which code to use for welding procedure and/or welder qualification for pipe welding, you have to know the design and construction code applicable to the system. Please read far enough into scope and diagram illustrating the application of either B31.3 and B31.4 hope this helps rgds 2011/4/21 pradip kumar sil < pradipsil@gmail.com > Dear all, ...

Materials & Welding

Search This Blog