Skip to main content

[MW:10812] Re: 10776] welding bevel design

By Materials & Welding

 

Standing in what code? From AWS D1.1 figure 3.4:

 

 

cid:image004.jpg@01CC01FA.C36D1720

cid:image006.jpg@01CC01FA.C36D1720cid:image009.jpg@01CC01FA.C36D1720

 

 

On Apr 22, 11:46 am, "Abuhanip bin Abdul" <abuha...@labuanship.com> wrote:

> I think your problem can be solve if try to search in Google about Joint

> Design.

>  I search just a couple minute in I found all the joint design for double

> bevel

>

>

>

>

>

>

>

> -----Original Message-----

> From: materials-welding@googlegroups.com

>

> [mailto:materials-welding@googlegroups.com] On Behalf Of hepo

> Sent: Thursday, 21 April, 2011 4:25 PM

> To: Materials & Welding

> Subject: [MW:10776] welding bevel design

>

> hello all

> can anyone guide me to a online site for ready Joint design details/

> sketches available to be used for general purpose fabrication plate works...

> job in hand 50mm thk plt to weld to higher thk using double bevel ...looking

> for bevel and root thk...

> thanks in advance

> hepo

>

> --

> To post to this group, send email to materials-welding@googlegroups.com

> To unsubscribe from this group, send email to

> materials-welding+unsubscribe@googlegroups.com

> For more options, visit this group's bolg athttp://materials-welding.blogspot.com/

> The views expressed/exchnaged in this group are members personel views and

> meant for educational purposes only, Users must take their own decisions

> w.r.t. applicable code/standard/contract documents.

Comments

Post a Comment

Popular posts from this blog

Materails FAQs

By Materials & Welding
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? (asked by: boris.vielhaber@vait.com) A: DIN Nr. = 2393 T.2, 2394 T.2, EN 10025 W. Nr. DIN 17007 = 1.0038 Design DIN 17006 = RSt 37-2, S235JRG2 (Fe 360 B) Q: What is St DIN 2391 BK material? (asked by: dmcandrews@automaticstamp.com) A: Precision steel tubes, cold-finished/hard. Q: What is C.D.W. Boiler Tube? (asked by: montydude123@yahoo.com) A: Cold Drawn Welded Boiler Tube. Q: WHAT IS W.Nr. 1.4301? PLS TELL US IN EASY LANGUAGUE (asked...
21 comments
Read more

[MW:36169] Cold Bending Qualification

By Materials & Welding
Dear Experts,  Can anyone share the inspection requirements or a qualification procedure for cold bending? Our client spec states only the requirements for induction bending and would like to know your opinion on the cold bend inspection requirements. The code of construction is B31.3, Max. 5D bends, A106 SS 316L.  Thanks in Advance. -- https://materials-welding.blogspot.com/ https://www.linkedin.com/groups/122787 --- You received this message because you are subscribed to the Google Groups "Materials & Welding" group. To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com . To view this discussion visit https://groups.google.com/d/msgid/materials-welding/1be61cc3-e9c9-4a5f-834d-e8485e248432n%40googlegroups.com .
Post a Comment
Read more

Heat tint (temper) colours on stainless steel surfaces heated in air // Heat tint

By Materials & Welding
Introduction The colour formed when stainless steel is heated, either in a furnace application or in the heat affected zone of welds, is dependent on several factors that are related to the oxidation resistance of the steel. The heat tint or temper colour formed is caused by the progressive thickening of the surface oxide layer and so, as temperature is increased, the colours change.   Oxidation resistance of stainless steels However, there are several factors that affect the degree of colour change and so there is no a single table of colour and temperature that represents all cases. The colours formed can only be used as an indication of the temperature to which the steel has been heated. Factors affecting the heat tint colours formed Steel composition The chromium content is the most important single factor affecting oxidation resistance. The higher the chromium, the more heat resistant the steel and so the development of the heat tint colou...
Post a Comment
Read more