Hi,
3.1 certificate requirements for metalic products you can find out in EN 10204:2004Ed, It specifies about 2.2, 3.1 & 3.2 certificates requirements only.
Cheers,
Raj
On Tue, Mar 29, 2011 at 7:27 AM, john clough <johnclough692@hotmail.com> wrote:
Dear Sirs--
I need to review material certificates regarding material grades, mechanical tests etc, these material certificates are ISO 3-1, I am familiar with ASME Section 1X which is where I would look for this information if I was working to ASME Standards, where would I find the same information working to ISO standards.
Thankfully
John
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Comments