Re: [MW:10432] Welder's qualification for diffrent steels and steel alloys.

Hi, as per QW-403.18 A change from one P-Number to any other P-Number or to a base metal not listed in table QW/QB- 422, except as permitted in QW-423, and in QW-420.2. So,P.No.Qualification range shall be As per QW423.1.But you have to refer all other essential variables QW352 to 357. Thanks & Regards, (Karthik) Karthikeyan.S QA/QC Manager Getabec Energy Co.,Ltd. 379,Moo6,Soi8,Nikhomphatana, Rayong-21180, Thailand. Phone: 0066 38 897035-8 (Off) Fax: 0066 38 897034 Hand Phone: 0066 892512282 --- On Sat, 3/19/11, Narendra Gohil <ngohil@qafco.com.qa> wrote: From: Narendra Gohil <ngohil@qafco.com.qa> Subject: Re: [MW:10429] Welder's qualification for diffrent steels and steel alloys. To: materials-welding@googlegroups.com Date: Saturday, March 19, 2011, 4:08 PM Dear Mr. Naskar, That means mainly we have to follow QW-353(SMAW) or QW 356(GTAW) for welder qualification.And that clearly mentioning P no as essential variable for the base metals. So here even if  my welder is qualified with CS.I have to go for separate qualification for low alloy steel as P no. is changing. Kindly correct me if my understanding is not correct. Thanks & rgds Narendra Gohil Welding Engineer QAFCO Ph.+974-44228289(O) From:        Sukamal Naskar <sukamalbecmet@gmail.com> To:        materials-welding@googlegroups.com Cc:        Narendra Gohil <ngohil@qafco.com.qa> Date:        19/03/2011 11:52 Subject:        Re: [MW:10428] Welder's qualification for diffrent steels and steel alloys. Sent by:        materials-welding@googlegroups.com Dear Mr. Gohil,   Whenever you will qualify any welder, you have to consider all the essential variables QW353, QW356.   The F-No will chage for SMAW , and for GTAW may be the F-No wil be same.   If all the essential variables of QW 353 (SMAW) and QW 356 (GTAW) dosen't change , then you can qualify the welders accordingly.   Kind Regards,   Sukamal Naskar Senior Welding Engineer Bohler Welding On Sat, Mar 19, 2011 at 11:36 AM, Narendra Gohil <ngohil@qafco.com.qa> wrote: Dear Experts, As per ASME sec.IX- QW423.1 mentioning Base metals for  welder qualification and also mentioning qualified production base metals against that. Like; P-or S-No.1through P -or S- No.11,P- or S-No. 34,and P- or S-No.41 through P- S-No.49 and against that  same grouping and range of P- or S-No. mentioned for qualified production base metals. That means if a welder qualified with as for example in CS(P no-1) welding(GTAW or SMAW any one ) with preheating and PWHT welding parameters,he can qualified with Low alloy steel like (P.No.4 or other in low alloy steel). I have been questioned by our Inspection experts and I don't have answer other than mentioned in QW401.2"essential variable"(Performance). Thanks & Rgds.   Narendra Gohil Welding Engineer QAFCO Ph.+974-44228289(O) -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. -- Sukamal -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents. -- To post to this group, send email to materials-welding@googlegroups.com To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com For more options, visit this group's bolg at http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.