API 5L PSL -1 is used for catagory D or noraml service fluides. i.e. cooling water, utility water, air etc services and not required many of the testing requirements, where as PSL-2 pipe is used for catagory M fluids i.e. Hudrocarbons, Sour etc., requiring NACE compliance, hence more costly.
Go through API 5L for clear understanding.
Regards.
Date: Fri, 18 Mar 2011 17:56:12 +0300
Subject: [MW:10418] API 5L- PSL 1 & PSL 2
From: nizamudeens1@gmail.com
To: materials-welding@googlegroups.com
---------- Forwarded message ----------
From: Nizamudeen S <nizamudeens1@gmail.com>
Date: Fri, Mar 18, 2011 at 5:41 PM
Subject: API 5L- PSL 1 & PSL 2
To: materials-welding@googlegroups.com
--
From: Nizamudeen S <nizamudeens1@gmail.com>
Date: Fri, Mar 18, 2011 at 5:41 PM
Subject: API 5L- PSL 1 & PSL 2
To: materials-welding@googlegroups.com
Dear Gentlemen,
Can any one advise me regarding the majour difference between the Specifications PSL 1 and PSL 2 as per API 5L
Thanks in advance
--
--
Nizamudeen
QC Engineer
HOTECC,KUWAIT
PH-67056774
Email- nizamudeen@hotecc.com
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment