Dear Ramesh Barot,
Yes. As per ASME Sec IX 2010 edition with reference to the following
Refer list of changes and record number 08-1330 along with
Refer QW 142, 143 , QW-191.2.1 & QW-302.2
It states UT can be conducted on test welds in material ½ “ (13mm) thick or greater
It shall be done with written procedure verified by the manufacturer to be in compliance with T-150 of sec V ( which states about a written procedure and demonstration…)
Hope this is helpful
Cheers
MM
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Ramesh Barot
Sent: Wednesday, March 30, 2011 4:58 PM
To: Materials Welding
Subject: [MW:10529] Welder Qualification
Dear all experts,
Can we qualify welder by UT?
Thanks,
With Best Regards,
Ramesh Barot
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment