HI
please refer ASME sec II part C FOR CONSUMABLES U MAY REFER ELECTRODE CLASSIFICATION AND REFER THE MANUFACTURER'S RECOMMENDATION
E70 16 HERE 1 DENOTES ALL POSITION WELD AND IT IS A LOW HYDROGEN SO BETTER GO FOR REDRY TO REDUCE HYDROGEN INDUCED CRACK
On Sun, 19 Dec 2010 22:07:51 +0530 wrote
>
>
>
Hi,
>
>
Both electrodes you may use and both require baking both are suitable
>
for all position and E7016 is costlier than E7018 and more over E7018
>
will give approximately about 15 / 20% volume of weld metal than E7016
>
as E 7018 has iron powder is mixed in its flux.
>
>
>
>
On Sun, 19 Dec 2010 12:34:06 +0530 wrote
>
>E 7018 is all position electrode requiring baking/ heating for sound
>
weld. E7016 is flat position welding electrode and does not require
>
baking/ heating for sound weld.
>
>
Pramod Tiwari
>
>
>
On Sat, 18 Dec 2010 17:44:52 +0530 pradip kumar sil wrote
>
>
>Dear sir,What is the quality wise difference between E-7018 ( BASIC
>
LOW HYDROGEN)& E-7016 ( BASIC SODIUM LOW HYDROGEN).Can i use E-7018
>
insted of E-7016.Where is the specific area of these two
>
electroderegardssil--
>
>
>To post to this group, send email to materials-
>
welding@googlegroups.com
>
>
>To unsubscribe from this group, send email to materials-
>
welding+unsubscribe@googlegroups.com
>
>
>For more options, visit this group's bolg at http://materials-
>
welding.blogspot.com/
>
>
>The views expressed/exchnaged in this group are members personel views
>
and meant for educational purposes only, Users must take their own
>
decisions w.r.t. applicable code/standard/contract documents.
>
>
>
>
>
>
>
>
--
>
>
>
To post to this group, send email to materials-welding@googlegroups.com
>
>
>
To unsubscribe from this group, send email to materials-
>
welding+unsubscribe@googlegroups.com
>
>
>
For more options, visit this group's bolg at http://materials-
>
welding.blogspot.com/
>
>
>
The views expressed/exchnaged in this group are members personel views
>
and meant for educational purposes only, Users must take their own
>
decisions w.r.t. applicable code/standard/contract documents.
>
>
>
Dear Sir,
>
>
>
>
>
>
Thanking You,
>
>
Honesty is the best Policy
>
>
With Warm Regards,
>
>
Muthu Barathi P
>
Mobile No:00962788269821 (Jordan)
>
00962775401951
--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
Dear Sir,
Thanking You,
Honesty is the best Policy
With Warm Regards,
Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951
 |
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment