With due respect, Heat Input depends on mechanical properties such as Toughness, Tensile and yeild strength and Hardness.
For toughness, it's not certain, to an extent increasing then decreasing, but for others it has monotonic relationship.
With refernce to the steel mentioned, ASTM 516 gr.70 (C-Mn-Si), Tensile strength of Weld metal would decrease due to coarsening of structure and fromation of grain boundary ferrite, When SMAW used, with Higher Heat Input, C-Mn-Si content would reduce therefore, Ultimetaly it would also effect Tensile properties of Weld metal.
If you still disagree with above explanation, Please provide some basis to substantiate your claim.
Regards
Manpreet Singh
Welding Engineer
On Sun, 19 Dec 2010 12:18:50 +0530 Bhavesh Patel
>I totaly disagree with manpreet because heat input only affects the
>tougness property of material. As far as i know UTS never depends on
>the welding processes. BHAVESH
>
>On 12/18/10, manpreet <manpreetsin88@rediffmail.com> wrote:
>> Hi, Heat Input is goint to be the key factor in this case, which would be
>> less for GTAW.so for GTAW, there would be more UTS.Due to limited
>> information, this is only thing i can predict, else more info like heat
>> treated condition and weld joint, would be needed.RegardsManpreet
>> SinghWelding EngineerOn Fri, 17 Dec 2010 8:43:49 ,Harish Kannepalli
>> <harishkannepalli@gmail.com>; wrote
>> In theory both will have same UTS. But while testing, slight variation may
>> be there due testing conditions.
>> 2010/12/16 Shaunak Upadhyay <shanupadhyay@gmail.com>;
>> 1) Material Specifcaiton: SA 516 GR 70 Size: 6.0 mm
>> thk 300 mm Length x 300 mm
>> Width Process: GTAW Consumable: ER70S-22)
>> Material Specifcaiton: SA 516 GR 70 Size: 6.0 mm
>> thk 300 mm Length x 300 mm
>> Width Process: SMAW Consumable: E7018Which test
>> piece have more UTS in these two processes.Regards,Shaunak Upadhyay--To post
>> to this group, send email to materials-welding@googlegroups.comTo
>> unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.comFor more options, visit this
>> group's bolg at http://materials-welding.blogspot.com/The views
>> expressed/exchnaged in this group are members personel views and meant for
>> educational purposes only, Users must take their own decisions w.r.t.
>> applicable code/standard/contract documents.--
>>
>> regards,
>> Harish.
>> -- To post to this group, send email to materials-welding@googlegroups.comTo
>> unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.comFor more options, visit this
>> group's bolg at http://materials-welding.blogspot.com/The views
>> expressed/exchnaged in this group are members personel views and meant for
>> educational purposes only, Users must take their own decisions w.r.t.
>> applicable code/standard/contract documents.
>>
>> --
>> To post to this group, send email to materials-welding@googlegroups.com
>> To unsubscribe from this group, send email to
>> materials-welding+unsubscribe@googlegroups.com
>> For more options, visit this group's bolg at
>> http://materials-welding.blogspot.com/
>> The views expressed/exchnaged in this group are members personel views and
>> meant for educational purposes only, Users must take their own decisions
>> w.r.t. applicable code/standard/contract documents.
>>
>
>--
>To post to this group, send email to materials-welding@googlegroups.com
>To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
>For more options, visit this group's bolg at http://materials-welding.blogspot.com/
>The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
>
-- To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment