Monday, December 20, 2010

[MW:8810] Re: Chances for distortion during PWHT

Dear Akhil,

When material is rolled without normalising heat treatment afterwards
a lot of residual stresses will be present in the material caused by
the welding and rolling activities.
Once you execute PWHT relaxation will start because of the reduced
yield strength at the PWHT temperature, this will cause some
elongation in the material and causes the distortion after cooling
down.

Best Regards,

Hemran Pieper

On 19 dec, 07:27, akcme <akhil...@gmail.com> wrote:
> Dear All,
>
> How extend distortion can happen during PWHT for SA 516 Gr.70 60mm
> rolled weld.
>
> Regards
>
> Akhil

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

[MW:34920] Tubesheet Hole step

Hello Team, I have one question any tolerance given for tubesheet Hole step. Please do needful. Regards, AP  -- https://materials-...