Dear members
Can you please guide me to select PQR test coupon on the basis of my below requirement
1. PQR to be used for my job thickness 6.0 mm to 13 mm
2. Material of construction is SA516 GR.70 plate.
3. Welding process to be involved is only SMAW.
4. Test coupon to be Normalized at 900 deg.C after completion of welding.
5. Bend test, Tensile, Hardness & Impact test to be carried out as per Sec. IX.
6. All joints to be single V type and to be back chip for final run.
kindly guide me with some example.
thanks in advance.
Ajay
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
Subscribe to:
Post Comments (Atom)
[MW:34919] Welder qualification certificate
Dear All anyone can share a format for welder certificate and card format Thanks & Best Regards Saleem manhappulath Mob:+9665...
-
Q: What are equivalents for standard Q 235 B (and Q 235 A) for U-channels? ...
-
Definition of buttering from ASME Section IX, QW/QB-492 Definitions: Buttering: the addition of material, by welding, on one or bot...
-
Section I. PRINT READING 3-1. GENERAL a. Drawings . Drawing or sketching is a universal language used to convey all necessary information to...
No comments:
Post a Comment