Dear Mr.Vivek,
QW 403.5 is a supplemntary essential variable .(it is applicable while impact test and or PWHT is required). In your case you cannot use this WPS for (P1 TOP1 OR P8 TO P8). According to QW 424, "One metal from P-number to any metal from any other P-number used for Procedure qualification" it is qualified for "Any metal assigned the first P number to any metal assigned the second P number".
You can use your WPS for amy metal from P1 to any metal from P8 only.
Thanks & Regards,
(Karthik)
Karthikeyan.S
QA/QC Manager
German-Thai Boiler Engineering Cooperation Limited.
Rayong Factory ;
379 Moo.6 Soi 8, Tambol Pananikom,
Nikompattana, Rayong 21180 THAILAND
Tel : +66 38 897 035-9 Ext. 137
Fax : +66 38 897 034
Hand Phone: 0066 892512282
On Wednesday, October 16, 2013 8:10 PM, Vivek Pandey <vivek.pande06@gmail.com> wrote:
Dear Sir,
-- I have doubt something about para QW 403.5 of SEC IX. If i have qualify a PQR with dissimilar meta llike (P1 TO P8). Can i use the same PQR with same P number like (P1 TOP1 OR P8 TO P8).
Kindly give us your suggestion on same quarry as soon as possible.
Regards.
vivek
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
No comments:
Post a Comment