I classify as the entrapped gas has escaped leaving a hole in the weld. The rectification has not been done. It should have been ground or gouged and re welded.
Regards,
S C Balawat.
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Sathish Kumar
Sent: Monday, November 19, 2012 3:11 PM
To: materials-welding@googlegroups.com
Subject: [MW:15959] What kind of weld defect? pl advice..
Dear experts,
pl find attach.
it is a structure welding. fillet weld.
What kind of defect is this? whether this is acceptable or reject as per spec/code. pl specify exact reference.
thanks in advance.
sathish
saudi
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment