Re: [MW:14842] Re: Argon gas consumption for GTAW

Dia and thickness (for e.g. 96-16 is 96 inch dia and 19mm thickness)

On Sun, Jun 24, 2012 at 3:05 PM, <george.dilintas@gr.bureauveritas.com> wrote:

Hi, very usuful the XL sheet.
what is the meening of  96-19,... 56-Xs etc
Could you calrify please?

best regards

Dr. Georgios Dilintas

Authorized Nuclear Inspector
Authorized Inspector Supervisor
API 510 Inspector

I&F REGIONAL TECHNICAL MANAGER
BUREAU VERITAS PIRAEUS - GREECE
Tel: +30 210 40 63 113/4
Fax: +30 210 40 63 118
Cell: +30 69 44 64 62 04
mohd <mohd52100@gmail.com>

mohd <mohd52100@gmail.com>  Sent by: materials-welding@googlegroups.com 23/06/2012 07:20 Please respond to materials-welding@googlegroups.com

To materials-welding@googlegroups.com cc Subject [MW:14660] Re: Argon gas consumption for GTAW Ref

Dear Nayan,

Pl find attachment for calculation XL sheet...

Let me know if any querry...

Regards,
Mohd.



On Tuesday, June 19, 2012 7:23:44 AM UTC+3, Nayan wrote:
Dear All,

Actually I would like to know How much the Argon gas require during GTAW welding.

In my plant we are going to weld 45000 different sizes joints. can you tell me that is thre any standard or approx method to measure the consumption of the shielding gas(

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.