Tuesday, July 10, 2012

[MW:14837] RE: 14830] USE of PQR for more than one Subcontractors

In general, the answer is no.  If these contractors are independent and have their own quality control manual under which the work is performed, then the answer is solidly no. This is the general intent of the Code – each entity involved in ASME fabrication shall have their own procedures.

 

However,QW-201 does allow for exchange of WPSs/PQRs if the subordinate companies perform all work under the quality control manual of the superior company.  This would be most common in corporate divisions/companies working under one parent company.

 

Please review ASME Interpretation IX-01-02.

 

John A. Henning

Welding & Materials

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Parveen Kumar Nakwal
Sent: Tuesday, July 10, 2012 3:19 AM
To: materials-welding@googlegroups.com
Subject: [MW:14830] USE of PQR for more than one Subcontractors

 

Dear Experts.

 

Let us suposse client is A & B is Contractor.

Under B ( C,D & E are more 3 subcontractor companies are working).

 

WPS/PQR had been established by Subcontractor C only under the shadow of B.

SO can other subcontractors i.e D & E companies can use the same PQR.

 

please mention the clause no. as per ASME sec. IX, is it QW302 ?

 

Waiting for reply.

 

Parveen K. Nakwal

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.


______________________________________________________________________
The information in this email is confidential, and is intended solely for the addressee(s). If you are not the intended recipient of this email please let us know by reply and then delete it from your system; you should not copy this message or disclose its contents to anyone. The internet can not guarantee the integrity of this message. HAMON (and its subsidiaries) shall (will) not therefore be liable for the message if modified.
______________________________________________________________________

No comments:

[MW:34916] Applicability of Impact requirement as per ASME B31.3

Dear All, Design code – ASME B31.3, Welding Code- ASME BPVC SEC IX Material  to be used used during Fabrication - SA 333Gr6 (P No.1 G...