if the paint system asking less dft than the profile it may cause problem like flash rusting but if the paint system askin more than the surface profile there is no problem,i think you will get good adhesion
-- Haseeb
KSA
On Wed, Oct 27, 2010 at 8:58 AM, Sundaram Sundaram <nss2410@gmail.com> wrote:
Dear friends,
Blasting Grade required - SA2.5
Surface profile required - 40 - 70microns
If the surface profile crossing the required limit 70-
80microns then what will the effect on painting and what is the
reference code.Please guideme
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment