I consulted the ASME B31.3 code "vent hole" for reinforcement and I
found this article 328.5.4 connections ( g ) and ( h ) page 64
edition 2008.
G) Reinforcing pads and saddles shall have has good made with the
parts to which they are attached. In wind hole shall be provided at
the side (not at the crotch) of any pad now saddle to reveal leakage
in the weld between branch and run and to allow venting during welding
and heat treatment. In pad now saddle may be made in more than one
piece yew joints golden between pieces have strength equivalent to pad
saddle relative(parent) metal, and each piece has yew has wind hole.
H) Examination and any necessary repairs of the completed weld between
branch and run sh has pad now saddle.
If I apply this article the pneumatic test or the fluorescent
penetration test Hello my friends,
Thank you very much for your answers.
I consulted the ASME B31.3 code "vent hole" for reinforcement and I
found this article 328.5.4 connections ( g ) and ( h ) page 64
edition(publishing) 2008.
G) Reinforcing pads and saddles shall have has good made with the
parts to which they are attached. In wind hole shall be provided at
the side (not at the crotch) of any pad now saddle to reveal leakage
in the weld between branch and run and to allow venting during welding
and heat treatment. In pad now saddle may be made in more than one
piece yew joints golden between pieces have strength equivalent to pad
saddle relative(parent) metal, and each piece has yew has wind hole.
H) Examination and any necessary repairs of the completed weld between
branch and run sh has pad now saddle.
I apply the pneumatic test or the fluorescent penetration test ?
My best regards
Redouane (Project engineer)
Algeria
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding-unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment