When PED (2014/68/EU) is applicable yes (see Annex I - 3.1.2), the NoBo has to approve the WPS,.
When ASME is applicable No. In ASME the manufacturer certifies the PQR, the WPS not
Στις Σάβ, 21 Μαρ 2020 στις 6:04 π.μ., ο/η Venkat Ramana <venkatgps.ramana@gmail.com> έγραψε:
--Dear Experts,My query is that, is there any mandatory by TPI approval (Seal and Sign) on every WPS ?? even though they have already sign into the supporting PQR'S....KINDLY CLARIFY WITH RELEVANT CODES AND STANDARDS.Thanks & RegardsVenkat+91 9676061257
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAHAXWsPJvRAQu5%3DeNN0L8qFX_-SjVMCK-YAkoQ2AjshHsBmPdw%40mail.gmail.com.
Dr. Georgios Dilintas,
Dipl. Ing. In Aeronautic and Space Engineering
Ph.D in Mechanics of Solids - Computational Mechanics
A.I.S, A.N.I, IRCA Lead Auditor
Welding, Stress Analysis, Corrosion, QA/QC, Failure Analysis, Risk Analysis
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40BW--HFpOhptj50KfnKQzmStwE%2BbDL8JAGdPyV-961Yxg%40mail.gmail.com.
Comments