Re: [MW:30621] Question on Joint efficiency

Answer 'a' is correct

On Wed, Mar 11, 2020, 09:00 Brijesh Maurya <brijeshmaurya492@gmail.com> wrote:

i thik 'a' is a correct answer

On Wed, Mar 4, 2020 at 2:00 PM Muhammed Ibrahim PK <ibratech@gmail.com> wrote:

Gents,

Please help me to find the answer on the below question.

1.       Two head to shell joints, one joining a seamless hemispherical head to shell was radiographed for the full length and the other joint joining a seamless standard torispherical head to shell was spot radiographed. The weld joint efficiency for each of these joints will be: UW-12 (D)

a.       1,  0.85

b.      1,  1

c.       0.85,  1

d.      0.85, 0.85

Which will be the answer ?

Thanks & Regards
Muhammed Ibrahim PK

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CALOPgmPR8pXSye0a-KaJpmTAKJ08aCVnChVyzc5S-Lqx1XY7tw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAOBi_ePohQdqmn6AjKW6%2BCS-EwBreqw8DKQGcmugTu-J4wcY9g%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPRS9UP8S05%2BhDPQNhJK6QDY2SqLYYnw-rVcFe82iJyTc_C_Pg%40mail.gmail.com.