Re: [MW:30658] Re: TPI approval on WPS

Just to add,

If it a Heavy fabrication shop fabricating heavy equipments with ASME stamp you can use your AI.

If it is a plant construction site, normally client requires PQR qualified at site

Thanks & Regards

J.Gerald Jayakumar

On Tuesday, March 24, 2020, 02:13:08 PM GMT+7, 'james gerald' via Materials & Welding <materials-welding@googlegroups.com> wrote:

TPI not a ASME Code requirement.

But it depends on Client Specification and Client Acceptance. Generally it is a practice to Qualify Welders &  PQR's with reputed TPI so that it can be Accepted by all Clients.

Thanks & Regards

J.Gerald Jayakumar

On Tuesday, March 24, 2020, 11:33:24 AM GMT+7, NARK <nidhin595@gmail.com> wrote:

Dear,

The TPI is not mandatory for the welder qualifications and welding procedure qualifications as per the code,if the client specification or contract  is mentioned any requirement ,then it become a mandatory requirement...

Regards

Nidhin r k 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/materials-welding/b9fe3e02-6868-47e3-bc35-29d142041fe1%40googlegroups.com

.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit

https://groups.google.com/d/msgid/materials-welding/1025202618.692552.1585026193219%40mail.yahoo.com

.