Tuesday, March 24, 2020

[MW:30653] Re: TPI approval on WPS

Dear,

The TPI is not mandatory for the welder qualifications and welding procedure qualifications as per the code,if the client specification or contract  is mentioned any requirement ,then it become a mandatory requirement...

Regards

Nidhin r k 

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/b9fe3e02-6868-47e3-bc35-29d142041fe1%40googlegroups.com.

No comments:

Re: [MW:35501] TEST COUPON ASME SEC IX

Yes, You can machine the Plate.  Prepare the Welding Running Sheet and mention 14 mm Plate machined to 8 mm Plate.  then the groove weld qua...