Re: [MW:29893] weld metal weaving in FCAW process-reg

Dear 

You may refer to ASME section part 2 C fig 2 note 4 , states 6 times the electrode diameter.

Regards

Manoj

On Tue, 23 Jul 2019 at 9:50 AM G.K.PILLAI <pillai762000@gmail.com> wrote:

Dear Experts,

Please advise me that as per BSEN standards how much weld metal weaving can be allowed for FCAW process .please provide some referance also.

Thanks in advance for your help.

Thanks&Regards,

G.K.PILLAI.

MOBILE

+97433329545    (QATAR)
+919500755882   (INDIA)

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CACmDAmV6Q13OUNvKfUng_rEdEd1yEZw1aMMAYwUmWG-vAbQxKw%40mail.gmail.com.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPRubRTtEUheOuF%2B1JzLi3GJiO2xPh%3DFdkNOmo4CU9opUkmJ1A%40mail.gmail.com.