No withou design calculations
Στις Πέμ, 27 Ιουν 2019, 13:17 ο χρήστης Chiranjeevi A <chiranjeevipuvvula@gmail.com> έγραψε:
Dear all,--We have a situation that we need to weld cap (material P11) to weldolet with P22 material. Size 2" NPS. Line temp is 560C and pressure 48bar. The rating of the main header is 1500# P22 mtl. Can we weld to the following conditions P11 mtl cap to weldolet P22 mtl.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAN4%2Bm0wXZEi-VoDnnHJRypawcopE%3DSoK2E0va9iJd3C1gTPJAQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAPOi40C3zKVYY5OT%3DXGC2b3cGe_s7KsKEuHUTbXFbFKej6drgQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment