Re: Re: [MW:29038] Please use google before sending questions to the group

Agree, it is a good source for ideal gathering but one could not get a strong conclusion / confirmation if he is a fresher or not that subject expert because every individual interpretations varies especially if they are freshers, and yes it is damn silly to give a reference from social networks, if you know the reference then refer it from internation codes and standards or engineering standards or even good workmanship or even best practices with references / case studies / failure analysis, in least cases i go for TWI because even after scrutinizing with codes and standards i go for TWI which i belive to be the second guidance after codes.

Even i find experts referring to hadfield fillers from internet but where as we can find in ASME. So when we guide we guide precise/ explicit / clearcut or with contiguous connection which links or interlinks closely to the queries.

So it is simply not acceptable just to google and conclude but google with experts conclusions.

Thanks.

---

Regards,

Mohamed Muneeb Mahaboob

CSWIP 3.2-89247/2 

IRCA-9001:2015 LA

ASNT-NDT-L2-RTFI-RT-UT-MT-PT.

SAP#:70021650 APs:JAPID, QCS & QCI.

E muneebslsa@gmail.com M +91-636-955-7189

''If you know any art by any means then SCULPT IT - no matter how cheap or useless it is - JUST SCULPT IT, you will never know when experts will be on demand'' 

 

From: pgoswami

Date: 2019-02-04 11:48

To: materials-welding

Subject: Re: [MW:29037] Please use google before sending questions to the group

In many instances "Google Search" may be ideal to gather initial information on any issue. In the context of current web based knowledge or library, "Google" is the most scientific and accurate search engine. However one has to be patient to find the correct answer.

Further queries posted in this forum could be beneficial to verify google findings.

Thanks. 

Sent from my Bell Samsung device over Canada's largest network.

-------- Original message --------

From: Prakash Gotimukul <gprakash31@gmail.com>

Date: 2019-02-04 08:58 (GMT+05:30)

To: materials-welding <materials-welding@googlegroups.com>

Subject: Re: [MW:29036] Please use google before sending questions to the group

This is very silly. Google is the most unreliable source. The rightway to know is

1. Get the right reference of codes n standards.

2. Try to get the latest edition n knowledge.

3. Seek interpretations of standards from persons with ready reference experience n knowledge.

Google is not the first to go. It need not be correct.

Develop a scientific attitude n read codes n standards.

Be a good engineer.

Rgds.
Prakash G  AIS

On Sun, Feb 3, 2019, 21:59 Ramin Kondori <raminkondori@gmail.com wrote:

Dear Members:

Please search google first.

You can better answers by using google.

I am surprised why people do not try google first. It is faster, easier and more efficient for these kind of questions.

For example, in your case, I just typed "valve closure test" on google for you.

this is the result page which gives you a lot of options and information.

If you did not find the answer there, then send your question to the group.

Or another example, Somebody earlier asked "how to qualify a WPS"...!!!

These kind of general questions could better be answered by searching online.

Thank you

Ramin  Kondori

Sr. QA/QC & Welding Engineer

-----------------------------------------------------------

PG-Dip. in Welding Engineering (IWE  AT  0070)

BSc. in Civil Engineering (IUT)

BGAS Painting Inspector

ASNT Level I&II

                        

On Thu, Jan 31, 2019 at 2:15 PM chiluka venkatramulu <ramuluchiluka@gmail.com> wrote:

Dear All,,

Is the Valve closer test means sheet leak test or body pneumatic test?

Venkatramulu

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.