Re: [MW:29043] PQR in PSL-1 Pipe

Refer para 7.4 of SAES-W-01*

Thanks 

Muneeb.

On Mon, Feb 4, 2019, 7:15 PM Revdiwala Darshan <darshanmrevdiwala@gmail.com> wrote:

It depends on your production joint material.

If X65 and above then PQR shall be qualified with same material.

Regards,

Darshan

On Mon, 4 Feb 2019, 1:26 pm puneet arora, <puneetaroralnt@gmail.com> wrote:

Dear All,

In Aramco project can we use API 5L Gr. B PSL-1 Pipe for PQR purpose only.

With Regards,

Puneet

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.