This is Hastalloy 254?
On Sun, 28 Oct 2018 12:58 pm Mohamed Muneeb, <muneebslsa@gmail.com> wrote:
Greetings,If I am not wrong your material is Sandvik smo which comes under p8 group 4? Please confirm.For this you can definitely use mentioned fillers as we did the same in gosps for crevice services.--On Sun, Oct 28, 2018, 2:13 PM Revdiwala Darshan <darshanmrevdiwala@gmail.com> wrote:Thankyou sir for your valuable reply.I am trying ESAB ERNiCrMo-3 for GTAW and ENiCrMo-3 for SMAW.--On Sat, 27 Oct 2018, 5:28 am PGoswami, <pgoswami@quickclic.net> wrote:Hi,
Please see the attached document providing detailed information on UNS 31254 steel, including welding. Recommended consumables are highlighted. Usually Inconel 625(ER-NiCrMo3) is the preferred grade for this alloy. The other grades are recommended based on the design criteria.
You should check with reputed manufacturers, on the best recommendation.
I had dealt with Metrode products in the past. However there're other good manufacturers also.
Thanks.
P.Goswami.P.Eng, IWE.
Welding & Metallurgical Specialist
-----Original Message-----
From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Darshan Revdiwala
Sent: October 22, 2018 12:43 PM
To: Materials & Welding <materials-welding@googlegroups.com>
Subject: [MW:28480] Welding of UNS31254
Can anyone share practical experience for welding of UNS 31254 and consumables selection for Tig and SMAW process.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment