Not a good practise
Rgds.
Prakash G AIS
Prakash G AIS
On Mon, Oct 15, 2018, 12:06 sandeep kumar <sandeepdhiman63@gmail.com> wrote:
Certainly you can perform. Make sure equipment is calibrated and the voltage is set to the value as per the specification requirements. You will need higher voltage as the coating thickness will increase. After earthing, verify the equipment readiness for the detection by touching the uncoated surface of the spool with the holiday machine.--Regards
sandeep Kumar
On Sunday, October 14, 2018 at 9:38:19 AM UTC+3, pankaj kolhe wrote:Dear expertsCan we perform hoilday test on painted surface of SS316L spools.pankaj
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment