Hi Mohsin,
No its not acceptable.
Purpose of MEK is to verify proper curing.
Best regards,
Salman
From: 'mohsan ali' via Materials & Welding <materials-welding@googlegroups.com>
Sent: Tuesday, October 16, 2018 1:48 AM
To: Materials & Welding
Subject: [MW:28425] MEK test
Sent: Tuesday, October 16, 2018 1:48 AM
To: Materials & Welding
Subject: [MW:28425] MEK test
Please find below pictures of MEK test and guide me is it acceptable
Sent from Yahoo Mail for iPad
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
Sent from Yahoo Mail for iPad
Begin forwarded message:
On Tuesday, October 16, 2018, 4:18 AM, Mohsan Ali <muhammadmohsanali@gmail.com> wrote:
--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.
No comments:
Post a Comment