Re: [MW:28438] MEK test

I did this after two years to check coating strength means it's converted into chalking and my client said it is not applicable for old joints . Is there any reference about it


Sent from Yahoo Mail for iPad

On Tuesday, October 16, 2018, 8:40 AM, Salman Arshed <salmanarshed@hotmail.com> wrote:

Hi Mohsin,

No its not acceptable.

Purpose of MEK is to verify proper curing. 

Best regards,

Salman

---

From: 'mohsan ali' via Materials & Welding <materials-welding@googlegroups.com>
Sent: Tuesday, October 16, 2018 1:48 AM
To: Materials & Welding
Subject: [MW:28425] MEK test

 

Please find below pictures of MEK test and guide me is it acceptable 


Sent from Yahoo Mail for iPad

Begin forwarded message:

On Tuesday, October 16, 2018, 4:18 AM, Mohsan Ali <muhammadmohsanali@gmail.com> wrote:

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout.

--
https://materials-welding.blogspot.com/
https://www.linkedin.com/groups/122787
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
Visit this group at https://groups.google.com/group/materials-welding.
For more options, visit https://groups.google.com/d/optout

.