RE: [MW:25298] STUD AND BOLT

CHECK the bolt length calculation as per ASME16.47

 

From: materials-welding@googlegroups.com [mailto:materials-welding@googlegroups.com] On Behalf Of Sajeev P
Sent: Monday, August 22, 2016 11:36 PM
To: materials-welding@googlegroups.com
Subject: Re: [MW:25291] STUD AND BOLT

 

 

For Process Piping B31.3,  335.2.3, Bolts should extend completely through their nuts. Any which fail to do so are considered acceptably engaged if the lack of complete engagement is not more than one thread.

 

Regards,

Sajeev

 

On Sat, Aug 13, 2016 at 6:47 AM, Sundaraj Anish <anishsundaraj@gmail.com> wrote:

Dear experts,

I have a query and looking  for earliest  response

How many threads should protrude beyond the nut?

 

 minimum 3 threads and maximum how many threads ?

 

Awaitng for your  response

Thanks & regards

Anish S 

Engineer-QA/QC

Mott MacDonald Pvt Ltd

Hassan

Mob: +91 9442938358

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CABtc4G5ccCSktoX3iRe_3WOgjJgiZUXPo6Jc3HuW%3D4Oa8YMTAQ%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

 

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANSvUP0QTA67YgecmcaM3Av8BqPFAoO5c-5_qr-2O14Fpkj9kw%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

----------------------------------------------------------------------------------------------------------
Information transmitted by this E-MAIL is intended only for the use of the addressee(s) and contains information that is privileged, confidential or exempt from disclosure under applicable law. If you are not the intended recipient or it appears that this mail has been forwarded to you without proper authority, you are notified that any use or dissemination and or copying of this email in any manner is strictly prohibited and you are requested to delete this e-mail immediately.
Communicating through e-mail is not secure and capable of interception and delays. Any one communicating with TATA Consulting Engineers Ltd., and / or its subsidiaries or associates or group companies by e-mail accepts the risks involved and their consequences.
While this e-mail has been checked for all known viruses, the addressee should also scan for viruses and notify the originator of e-mail.
---------------------------------------------------------------------------------------------------------