If the thickness us not higher than approx. 22 mm this material is impact test exempted. See ASME B31.3, table 323.2.2A curve B
Sent from my BlackBerry 10 smartphone.
| From: Perumal Govindan Sent: Κυριακή, 7 Αυγούστου 2016 - 05:40 To: materials-welding@googlegroups.com Reply To: materials-welding@googlegroups.com Subject: [MW:25208] Impact Testing requirement for welding procedure qualification |
Dear Experts,
-- We have the piping material spec. of API 5L Gr. B/ X52/X56 PSL piping materials, MDMT is -3 (North Kuwait) Degree centigrade and thickness ranging from 5 mm to 31 mm.
Please advice whether the impact testing is required to carried during PQT.
With Kind Regards
P Govindan
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CANiuf9eDAu_2bvpDf_hQfRpjSNW_E%2BgO%3DaXxrEh_HDPYKOufNA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.
Comments