[MW:25268] Minimum Diameter and Thicknes to perform NDT by UT manual

Dear All,

Please inform me reference and standard, what is minimum diameter and thickness to be able to perform by UT Manual,..?as per ASME V there is no information, as per AWS D.1.1 just only mention thickness from 8 mm to 200 mm, 


thanks

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/931d4b74-0ea4-4ed8-aaaf-0de57542db17%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.