Re: [MW:25213] Reg. post heating for low alloy steels

U should not take it immediately for P91, it has to cool down below 100deg

On 07-Aug-2016 8:10 am, "Prasu Cutie" <pracuty@gmail.com> wrote:

Dear experts,
We are going to start pqr for low alloy steels i.e. A335 Gr P11, P22, P5, P91 etc, it suppose to be post weld heat treated immediately  after welding. As per literature if pwht is not possible immediately  after welding, intermediate PWHT recommende .i.e pos heating.
Now the question is is there any code reference for the same? What is the heating time n temp???
The codes we r following  here are shell dep's n asme b 31.3
Project: refinery

Awaiting for your reply

Thanks n regards
Prasad
0096594122634

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAKgcArQMULX%3DQgcoXb8CgGM%3DmHiLQZG50iXgWuCR146W_HjO_g%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.

--
http://www.linkedin.com/groups/MaterialsWelding-122787?home=&gid=122787&trk=anet_ug_hm
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
---
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/CAJzm4eM1Q_PAHU-o-ThP%2B5%3DjA7z9gQEhDxC5Zt3qcBKXJ5YTfA%40mail.gmail.com.
For more options, visit https://groups.google.com/d/optout.