[MW:23241] Re: Tube to tube sheet mock up qualification

 Dear  Members,

 

I had a doubt about TTS joint mockup pullout test , as per the configuration no welding only expnansion , let me know the fr. value for that.

 

Best regards 

 

Thiyanes G  
On Monday, January 12, 2015 at 11:25:11 AM UTC+5:30, silambarasan veluchamy wrote:

Dear members,

We are going to carry out a Mockup Procedure qualification for T-TS joint as per ASME SecIX. what are the test required to carry for the qualification. I hear from a TPI that RT, Tear test & pull out has to be carried out, whereas ASME Sec IX & Tema class 'R' are not talking about the above said tests. 

Is the above said tests required? If so, the as per which standard?

Kindly advice

BR,

M.V.Silambarasan

--
You received this message because you are subscribed to the Google Groups "Materials & Welding" group.
To unsubscribe from this group and stop receiving emails from it, send an email to materials-welding+unsubscribe@googlegroups.com.
To post to this group, send email to materials-welding@googlegroups.com.
Visit this group at http://groups.google.com/group/materials-welding.
To view this discussion on the web visit https://groups.google.com/d/msgid/materials-welding/bdc8af70-c418-4149-8a5f-8a51b0ae6569%40googlegroups.com.
For more options, visit https://groups.google.com/d/optout.