You can use either ER 308 or ER 316. For low carbon L grade of Base material, you can use the L grade of electrode/Filler Rod.
J.GERALD JAYAKUMAR 00919344954677
--- On Thu, 2/17/11, Abhonkar, Abhay (NAR) <AAbhonkar@Dresser-Rand.com> wrote:
From: Abhonkar, Abhay (NAR) <AAbhonkar@Dresser-Rand.com>
Subject: [MW:9914] welding of dissimilar material
To: materials-welding@googlegroups.com
Date: Thursday, February 17, 2011, 10:37 AM
We want to weld SS 304 pipe with fittings made of SS 316. Request you to suggest the suitable filler wire for GTAW process. Also from where (ASME or B31.3) I can select the reference document Regards, Abhay Ext 448 IMPORTANT NOTICE:
This email may be confidential, may be legally privileged, and is for the intended recipient only. Unauthorized access, disclosure, copying, distribution, or reliance on any of it by anyone else is prohibited and may be a criminal offense. Please delete if obtained in error and email confirmation to the sender. --
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
|
--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at
http://materials-welding.blogspot.com/ The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.
No comments:
Post a Comment