Sunday, December 19, 2010

Re: Re: [MW:8802] Difference between E-7016 & E-7018



Hi,

Both electrodes you may use and both require baking both are suitable
for all position and E7016 is costlier than E7018 and more over E7018
will give approximately about 15 / 20% volume of weld metal than E7016
as E 7018 has iron powder is mixed in its flux.



On Sun, 19 Dec 2010 12:34:06 +0530 wrote
>E 7018 is all position electrode requiring baking/ heating for sound
weld. E7016 is flat position welding electrode and does not require
baking/ heating for sound weld.

Pramod Tiwari


On Sat, 18 Dec 2010 17:44:52 +0530 pradip kumar sil wrote

>Dear sir,What is the quality wise difference between E-7018 ( BASIC
LOW HYDROGEN)& E-7016 ( BASIC SODIUM LOW HYDROGEN).Can i use E-7018
insted of E-7016.Where is the specific area of these two
electroderegardssil--

>To post to this group, send email to materials-
welding@googlegroups.com

>To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com

>For more options, visit this group's bolg at http://materials-
welding.blogspot.com/

>The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.

>




--
>
To post to this group, send email to materials-welding@googlegroups.com
>
To unsubscribe from this group, send email to materials-
welding+unsubscribe@googlegroups.com
>
For more options, visit this group's bolg at http://materials-
welding.blogspot.com/
>
The views expressed/exchnaged in this group are members personel views
and meant for educational purposes only, Users must take their own
decisions w.r.t. applicable code/standard/contract documents.
>


Dear Sir,





Thanking You,

Honesty is the best Policy

With Warm Regards,

Muthu Barathi P
Mobile No:00962788269821 (Jordan)
00962775401951

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.

No comments:

Re: [MW:35289] Welding consumable for S355J2WP material

S355 J2 WP  is a weathering structural steel  It has better atmospheric corrosion resistance. Use E 8018 - W1/W2  Electrodes This is regular...