Re: [MW:8740] Regarding cutting process for high chrome material

i)Make a notch along the marked line by grinding using cut off wheel to remove the hardfaced thickness

ii) Then base of roller can be cut by Plasma  and see that while cutting the cracked area does not get over heated to avoid any misinterpritation

 

Regards

 

Hegde P.B.

 

 

 

---

From: vinit vani <vinit_vani@yahoo.co.in>
To: materials-welding@googlegroups.com
Sent: Wed, 15 December, 2010 12:20:48 PM
Subject: [MW:8738] Regarding cutting process for high chrome material

Dear all   please go through the attached figure of hardfaced roller tyre. We want to cut the piece as shown in figure for failure analysis.   My query is- 1) what will be the suitable cutting process for High Chrome material?   2)Which parties in India specially in Mumbai offers such service?   Urgent reply with possible causes for this crack will be highly appretiated.   Thanks & Regards   Vinit

--
To post to this group, send email to materials-welding@googlegroups.com
To unsubscribe from this group, send email to materials-welding+unsubscribe@googlegroups.com
For more options, visit this group's bolg at http://materials-welding.blogspot.com/
The views expressed/exchnaged in this group are members personel views and meant for educational purposes only, Users must take their own decisions w.r.t. applicable code/standard/contract documents.